Front Wheel Assembly; Wheel Center Adjustment - Honda CRF110F Service Manual

FRONT WHEEUBRAKE/SUSPENSION/STEERING
ASSEMBLY
!:l~~
.....
-
DUST SEAL
~., RIGHT WHEEL BEARING
"ijilll
(6201UU)
DISTANCE COLLAR
$'"
(6201UU)
Replace the wheel
Drtve in a new left (brake panel side) wheel bearing (1J , -- - - - - -
bearings itI pairs.
until It Is fu lly seated.
Do
not
reuse old Install the distance collar, then drive in the right wheel
bearings. bearing until
it
is sealed on the distance collar.
Wheel center
adjustment Is
necess81)' wtten
new spokes
8re
installed.
14-12
TOOLS:
[2J Driver
[3] Attachment, 32 x 35 mm
[4J Pilot, 12 mm
Wheel center adjustment
07749-0010000
07746-0010100
07746-0040200
Place the rim on the work bench and begin lacing with
new spokes.
Tighten the spokes In 2 or 3 progressive steps to the
specified torque.
TOOL:
Spoke wrench, 4.5 x 5.1 mm 07701-0020200
TORQUE : 3.2 N'm (0.33 kgf-m, 2.4lbHt)
Adjust the hub position so thai the distance from the
right end surface of the hub center to the side of rim is
12.0:t 1.0 mm (0.47
±
0.04 in) as shown.
Recheck the rim runout (page 14-10).
12.0:t 1.0 mm
(0.47:t 0.04 in)
•