Honda CRF110F Service Manual page 150

CLUTCH/GEARSHIFT LINKAGE
CLUTCH WEIGHT
Inslallths damper rubbers [1J to the drive plate 1 2].
[21
Hook the springs (1] to the clutch weights
12]
so that
;::============ [2 : : J ===~
their open ends facing the drive plale side.
10-16
Install the clutch weights and springs onto the drive
plate as shown .
Install the spring seat [1] , friction spring [2) and side
plale (3] to the clutch weight assembly [4J as shown .
Inslall the new E-dips [1] while compressing the
side
plate [2].
Align the open end of the E-clips and bosses [3J of
the side plale.
[4[