Kickstarter Installation - Honda CRF110F Service Manual

Make
sure
that the
snep
ring
is firmly
seated in the
groove.
CRANKSHAFTITRANSMISSION/KICKSTARTER
Install the special washer [1] to the kickstarter spindle.
INSTALLATION
Apply engine oil to the kickstarter gear teeth.
Install the kickstarter spindle
11]
while aligning its
ratchet spring with the groove of the right crankcase as
shown.
tnsert the return spring end into the hole on the right
--""1
crankcase as shown.
Assemble the crankcase (page 12-17).
Set the retainer (1) to the kickstarter spindle.
Temporarily install the kickstarter pedal [2) and bolt [3].
Turn the kickstarter pedal and completely install the
retainer while aligning its wide tooth with Ihe wide spline
on the spindle.
Release Ihe kickslarter pedal.
Remove the bolt and kicks tarter pedal.
Inslall Ihe snap ring [1]10 the kickstarter spindle groove.
Install the gearshift linkage (page 10-28).
[21
12-23