Right Crankcase Cover Installation - Honda CRF110F Service Manual

CLUTCH/GEARSHIFT LINKAGE
10-8
INSTALLATION
Apply grease to the kickstarter spindle oil seal [1jlips.
Clean the gasket mating surface of the crankcase and
righ t crankcase cover, being careful not to damage
them.
Install the dowel pins (1) and a new gasket [2] onlo the
crankcase.
InstaU the clutch lifter cam plale [3] onlo the clutch lifter
r-"';::;;'
bearing.
Install the clutch lever (4] onto the gearshift spindle
white aligning the punch mark of the lever with Index
line of the gearshift spindle.
Apply engine oil to the gearshift spindle Journal area.
Install the right crankcase cover 11] and tighten the right
r - - -...
"--=-
crankcase cover bolls [2) In a crisscross pattern in
several sleps.
Install the kickstarter pedal (1) to its original position as
marked during removal.
Install and tighten the boll [2].
Install the main step (page 2-6).
Fililhe engine with recommended engine oil
(page 3-10).
Make sure there are no oil leaks.
Check the clutch system adjustment (page 3-17).