o
- - ^
^^?
Air Conditioning Repair Procedures
Blower Motor High Speed Relay Renewal
6.
7.
8.
Place the flap box assembly to the fan housing and
reconnect the electrical connections.
Fit and tighten the screws securing the flap box to
the housing.
Raise the re-circulation flap, fit and tighten the
remaining screw.
Refit the blower motor assembly.
Reconnect the battery earth-ground lead.
8.2.11.1 Blower Motor High Speed Relay
Renewal
1.
Remove the blower motor assembly complete.
Figure 7.
2.
Open the flap for access.
3.
Using a suitable tool remove the relay from the
blower assembly (Fig. 1 -1).
4.
Fit a new relay and refit the blower motor assembly.
May 1996
8-61