Front Seat Runner Assembly; Front Seat Rail Motor - Aston Martin DB7 Workshop Manual

Em3^^
Electrics
Front Seat Runner and Rail Motor - Removal Procedures
6.6.04 Front Seat Runner Assembly
Procedure
1. Remove the seat from the car.
7>
Figure 1. Front Seat Runner Removal
2. Cut the tywraps (Fig 1-4) securing the seat belt
buckle harness and disconnect the buckle harness
plug (Fig 1-5).
3. Position the runneras required and release the bolts
(Fig 1-3) securing the front and rear of the seat
frame.
4. Release the front harness from its retaining clips
and disconnect the multi-plugs (Fig 1-8).
5. Remove the complete seat runner assembly (Fig 1 -
6).
6. Remove the seat belt bolt trim cover and remove
the seat belt bolt (Fig 1-2), buckle and buckle
bracket (Fig 1-9).
7. Fitandsecuretheseatbeltbuckletothereplacement
seat runner assembly.
6.6.05 Front Seat Rail Motor
Procedure
1. Remove the seat from the vehicle.
2. Remove the front seat runner assembly from the
seat.
3. Remove the seat harness clamp (Fig 1 -1).
4. Disconnect the seat rail motor plug (Fig 1 -10).
Figure 1. Front Seat Rail Motor Removal
5. Loosen the motor securing screws (Fig 1-11) and
remove the motor/drive assembly.
May 1996 6-11