Main Menu; Parameter Customisation; Datalogger Waveform Screen - Aston Martin DB7 Workshop Manual

The Aston Martin Lagonda Diagnostic System
Users Guide
• ^ ^
'Establishing connection to control module' should now
be displayed on the screen.
If for any reason the PDU cannot communicate with the
relevantvehiclecontrol modulea 'communicationsfailure
screen' will be displayed with a retry option.
Check all connections before retrying.
Once commu nications are successfu I 'Starti ng Datalogger'
will appear on the screen momentarily.
Datalogger will automatically default to the waveform
screen.
5V
TP
ov
149°C
EOT
-49°C _
lAT
-49°C _
" ^
Os 324s 648s
• \ N \
M\^
\!M\
n
•
i=-i
Datalogger Waveform Screen
•
Thedefaultwaveform screen will display previous
selected parameters. Ifthese parameters are ideal
for the test procedure then Datalogger can be
started immediately, simply by pressing the record icon.
Select the main menu icon to go to the main
menu screen.
5V
T P
=
ru
+ / -
o
• &
^
M\K
ras
1
I
Main Menu
The datalogger main menu) is the main control screen,
and can be selected from any of Datalogger's screens.
The main menu provides a single touch entry to each of
Datalogger's features.
These features include (left to right, top to bottom):
Bargraph Display
Parameter Customisation
On-Road Manual Trigger
Waveform Display
Datalogger timing
Parameter Customisation
Parameter customisation enables the selection of signals
to be recorded by Datalogger. It also enables the signal
units to be selected, the order in which the signals are
displayed, and whether the displayed signals are to be
used as a trigger.
The Parameter Customisation screen presents selections
in a five column table. Each column from left to right
represents:
Parameter name or acronym.
Record enabled.
Display order.
Trigger action.
Display S.I. Units.
Signals
• C O ? J ^ • ' S.I.
BAT-
ECT
EGRS
ETCC
ETCS
FF11
FF12
/•?
103
Parameter Customisation
Datalogger Main Menu
9-56 September 1996