Front Interior Lamps; Rear Interior Lamps; Front Seat Removal - Aston Martin DB7 Workshop Manual

Electrics
Interior Lamps and Front Seat - Removal Procedures
EM^^^
6.6.01 Front Interior Lamps
Procedure
1. Releasethequarterturnfasteneronthefrontinterior
light assembly and lower the assembly from the
roof liner.
Figure 7. Front Interior Lamp
2. Disconnect the interior lamp plug and remove the
interior lamp assembly.
6.6.02 Rear Interior Lamps
Procedure
1. Release the rear upper trim panel.
2. Remove two spire washers and the rear interior
lamp assembly.
6.6.03 Front Seat Removal
Procedure
1.
2.
Motor the front seat forward and remove the rear
securing bolts for the seat rails.
Motor the seat to the rear and remove the front seat
rail securing bolts.
Figure 1. Front Seat Removal
3. Lift the footweil carpet, release the access plate
securing screws and remove the plate to gain
access to the seat control unit.
4. Cutand remove thetywrapssecuringtheseat loom.
5. Disconnect the seat harness connectors at the
control unit.
6. Remove the seat assembly.
Figure 7. Rear Interior Lamps
3. Disconnect the lamp wiring and remove the lamp
assembly.
6-10 May 1996