Barometric Pressure Sensor - Renew - Aston Martin DB7 Workshop Manual

[EM^^^
Electrics
Barometric Pressure Sensor
6.7.07 Barometric Pressure Sensor -
Renew
Data
Torque Figures
Sensor mounting nut 2-3 Nm
Procedure
1. Disconnect the battery.
2. Remove the left rear quarter trim panel to access the
TCM and barometric pressure sensor.
Figure 1
3. Disconnect the harness multi plug (Fig. 1-3) from
the barometric pressure sensor (Fig. 1 -4 ).
4. Release the two securing clips (Fig. 1-5) and
remove the sensor).
5. Fitthe new sensor into position, and secure with the
two clips.
6. Connect the multi plug.
7. Refit the interior trim.
8. Reconnect the battery.
May 1996
6-17