Installing The Cd - Rom (Early Systems); Installing The Cd - Rom (Later Systems) - Aston Martin DB7 Workshop Manual

'D::B^^?
The Aston Martin Lagonda Diagnostic System
Installation Instructions
Installing the C D - R O M (Early Systems)
Installing the C D - R O M (Later Systems)
2.
3.
5.
Ensure that your hands are clean before touching
the CD-ROM disc, disc caddy, or the CD-ROM
drive.
Open the base station door to gain access to the
CD-ROM drive.
Open the CD caddy by squeezing the sides whilst
lifting the hinged door upwards (Fig 6).
Handling the CD by the edges only, remove it from
the protective sleeve and insert it into the caddy
with the image side uppermost. Close the caddy
door.
Insert the CD caddy into the CD drive in the base
station. Close and lock the CD-ROM drive door.
The base station is now ready for use.
Figure 6. CD-ROM Installation (Early Systems)
Later PDU systems have an improved CD-ROM
drive incorporating a tray loading mechanism for
the CD-ROM disc.
1. Ensure that your hands are clean before touching
the CD-ROM disc, or the CD-ROM drive.
2. Open the base station door to gain access to the
CD-ROM drive.
3. Press the tray eject button on the CD-ROM drive
(Fig 7). The tray will open automatically.
4. Remove the CD from its protective sleeve and place
it on the tray with the image side uppermost.
5. Gently push on the tray and the motorised
mechanism will start to retractthe tray automatically.
Alternatively, pressing the eject button will cause
the tray to close.
6. Close and lock the CD-ROM drive door. The base
station is now ready for use.
Figure 7. CD-ROM Installation (Later Systems)
May 1996
9-11