Multitech MULTIMODEM MT5600ZDX Owner's Manual page 56

MT5600ZDX Owner's Manual
Register Unit
S27 Bit Mapped Options Status (Indicates the status of command Op-
tions.) Default: 73 (49h)
Bit 0, 1, 3
Bit 2 Leased Line Control
Bit 4-5 Internal Select Clock
Bit 6 CCITT/Bell Mode Select (Bn)
Bit 7 Reserved
S28 Bit-Mapped Options Status Default: 0
Bit 0-1 Reserved
Bit 2 Reserved (always 0)
Bit 3-4 Pulse Dialing (&Pn)
0 = 39%-61% make/break ratio at 10 pulses per second (&P0)-- Default.
0 = 33%-67% make/break ratio at 10 pulses per second (&P1).
0 = 39%-61% make/break ratio at 20 pulses per second (&P2).
0 = 33%-67% make/break ratio at 20 pulses per second (&P3).
S29 1 minute 0–255
56
Range Default
Sync/Async
3 1
0 0
0 0
0 1
0 1
1 0
1 0
1 1
0 = Dial Up Line (&L0)--Default
0 = Internal Clock (&X0)--Default
1 = External Clock (&X1)
2 = Slave Clock (&X2)
0 = CCITT (B0)
1 = Bell Mode (B1)--Default
70ms
Description
0
0 = &M or &Q0
1 = &M1 or &Q1
0 = &M2 or &Q2
1 = &M3 or &Q3
0 = &Q4
1 = &Q5 (Default)
0 = &Q6
Sets the length of time, in units of 10
ms, that the modem will go on-hook
when it encounters a flash (!) dial
modifier in the dial string. The time
can be limited as it is a country
dependent parameter.