Multitech MULTIMODEM MT5600ZDX Owner's Manual page 49

Command: *B
Values:
Description:
Command: *D
Values:
Description:
Command: #CIDn Caller ID
Values:
Default:
Description: #CID0 Disables Caller ID
#CID1 Enables Caller ID with formatted presentation to the
#CID3 Enables Caller ID with unformatted presentation. The
Chapter 3 - AT Commands, S-Registers and Result Codes
View Numbers in Blacklist
n/a
This command requests the modem to return a list of
blacklisted numbers to the DTE.
den numbers as defined by country requirements will
not appear on this list. If no numbers are blacklisted,
only the OK result code is issued. The format of the
response is shown by the example below:
No. -- Phone Number
1; 6127853500
2; 2154778767
3; 2128724549
View Delayed Numbers
n/a
This command causes the modem to send a list of
the delayed numbers together with the delay associ-
ated with each. The modem will return a list of
delayed telephone numbers as defined in the *B
command. If no numbers are delayed, only the OK
result code is issued. The format of the response is
shown by the example below (delay times are shown
as:hours:minutes:seconds):
No. -- Phone Number--Delay
1; 6127853500
2; 2154778767
3; 2128724549
n = 0, 1, or 3
0
DTE. The modem will present the data items in a
<TAG><Value> pair format. The expected pairs are
data, time, caller code (phone number), and name.
modem will present the entire packet information, ex-
cluding the leading U's in ASCII printable hex numbers.
*#CID? Retrieves the current CID modem from the
modem.
Permanently forbid-
1:59:25
0:4:43
2:33:00
49