Multitech MULTIMODEM MT5600ZDX Owner's Manual page 48

MT5600ZDX Owner's Manual
Command: -K n
Values:
Default:
Description:
Command: -Q n
Values:
Default:
Description:
*This command is included only for compatibility and performs no function.
Command: -SEC=n Enable/Disable MNP10-EC
Values:
Default:
Description:
* -SEC=1,[<tx level>] where <tx level> is an optional transmit level subpa-
rameter (transmit level range is 0 dBm to -30dBm and is specified by a set S
91 value).
Command: @M n MNP 10 Initial Cellular Power Level Setting
Values:
Default:
Description:
*This command is included only for compatibility and performs no function.
Command: :E n
Values:
Default:
Description:
*This command is included only for compatibility and performs no function.
48
MNP 10 MNP Extended Services
n = 0, 1, or 2
0
-K0 Disables V.42 LAPM to MNP 10 conversion.
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 LAPM answer mode detection phase.
MNP 10 Enable Fallback to V.22 bis/V.22
n = 0 or 1
n/a
-Q0 n/a
-Q1 n/a
-SDR=n
n/a
-SEC=0 Disables MNP 10-EC
-SEC=1 Enables MNP 10-EC
n = 0-30
n/a
@M0 n/a
,
,
,
@M30 n/a
MNP 10 Compromise Equalizer Enable Command
n = 0 or 1
n/a
:E0 n/a
:E1 n/a