Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Multitech MT5600BA
Summary of Contents for Multitech MT5600BA
- Page 2 MultiModemII Quick Start Guide MultiModemII Quick Start Guide Models MT5600BA and MT5600BL P/N 82086201 Revision B Copyright © 1999–2001 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc.
-
Page 3: Table Of Contents
MultiModemII Quick Start Guide Contents Introduction ....................... 1 What Is in Your Modem Package? ..............1 What You Will Need ..................2 Safety Warnings ....................2 Step 1: Connect the Modem to Your System ..........3 RS232 Connection .................. 3 Dialup Connection ................. - Page 4 MultiModemII Quick Start Guide...
-
Page 5: Introduction
Your package should include: An MT5600BA or MT5600BL modem An external transformer module One (MT5600BA) or more (MT5600BL) modular telephone cables This Quick Start Guide A CD containing data communications and other programs... -
Page 6: What You Will Need
MultiModemII Quick Start Guide What You Will Need In addition to the contents of the MultiModemII package, you will need the following items: A computer with an unused serial port A shielded RS-232 serial cable with a male DB-25 connec- tor on one end and a connector to match your computer’s serial port on the other end A nearby AC power outlet... -
Page 7: Step 1: Connect The Modem To Your System
MultiModemII Quick Start Guide Step 1: Connect the Modem to Your System Turn off your computer. Placing the modem in a convenient location, connect it to your computer’s serial port, to the tele- phone line, to your leased line, to AC power, and, optionally, to your telephone. -
Page 8: Dialup Connection
For more information, see Appendix A of the User Guide. Two-Wire Leased Line Connection MT5600BA Plug one end of a two-wire phone cable into the modem’s LINE jack, and connect the other end to a leased line wall jack or terminals. -
Page 9: Power Connection
MultiModemII Quick Start Guide Power Connection Plug the transformer module into an AC power outlet or power strip. Plug the transformer module’s cable into the POWER jack on the modem. Note: Use only the transformer module supplied with the modem. Use of any other module voids the warranty and can damage the modem. -
Page 10: Step 3: Install And Configure Your Software
MultiModemII Quick Start Guide 2. In the Install New Modem wizard, select Don’t detect my modem; I will select it from a list, and then click Next. A dialog box with a list of manufacturers and a list of modem models appears. - Page 11 MultiModemII Quick Start Guide 3. Choose your modem from the software’s modem list. If it isn’t listed, choose a generic modem and modify the set- tings as necessary. 4. Change the modem initialization string, if necessary. The factory default configuration works well for most purpos- es.
-
Page 12: How To Get A Copy Of The User Guide
MultiModemII Quick Start Guide 7. If the software has an autobaud selection, make sure it is disabled. Autobaud applies only to older modems, and can cause problems if enabled. 8. If the software allows you to edit the no-connect messages (NO CARRIER, BUSY, NO ANSWER, NO DIALTONE), make sure there is no space between DIAL and TONE in NO DIALTONE.
Need help?
Do you have a question about the MT5600BA and is the answer not in the manual?
Questions and answers