Multitech MULTIMODEM MT5600ZDX Owner's Manual page 62

MT5600ZDX Owner's Manual
Register Unit
S82 - Break Handling Options
S82 is for compatibility purposes only, changing this register will not have any
affect.
S86 decimal 0, 4, 5, 9, 12, 13, or 14
S86=0 Normal disconnect, no error occurred.
S86=4 Loss of carrier.
S86=5 V.42 negotiation failed to detect an error-correction
S86=9 The modems could not find a common protocol.
S86=12 Normal disconnect initiated by the remote modem.
S86=13 Remote modem does not respond after 10 re-
S86=14 Protocol violation.
S91 dBm
S92 dBm
62
Range Default
modem at the other end.
transmissions of the same message.
0 to -15 dB
0 to -15 dB
Description
When the modem issues a NO CAR-
RIER result code, a value is written
to this S-Register to help determine
the reason for the failed connection.
S86 records the first event that con-
tributes to a NO CARRIER mes-
sage. The cause codes are:
10 Sets the transmit attenuation
level from 0 to 15 dBm for the PSTN
mode, resulting in a transmit level
from 0 to -15 dBm, In some coun-
tries, the transmit level may not be
changed and there are checks to
prevent transmit attenuation level
change. -10 dBm is the transmit
level default.
10 Sets the transmit attenuation
level from 0 to 15 dBm for the FAX
mode, resulting in a transmit level
from 0 to -15 dBm. In some coun-
tries, the transmit level may not be
changed and there are checks to
prevent transmit attenuation level
change. -10 dBm is the transmit
level default.