Software Configuration - Multitech MULTIMODEM MT5600ZDX Owner's Manual

MT5600ZDX Owner's Manual

Software Configuration

Communications software must be configured to work with the
MT5600ZDX, your computer, and the remote system it is calling.
Fortunately, most communications programs make the process easy
by providing a default initialization string to your modem as well as
defaults for most of the other required parameters.
Some software programs allow you to select your modem type from a
menu. By this method, initialization strings that correspond to a
particular modem type can be selected to operate optimally with the
software it is utilizing.
Figure 2-5. MT5600ZDX Initialization Setup
Other software programs require you enter an initialization string in the
software modem setup screen. If this is the requirement in your
software application, enter the following command string to initialize
your modem: AT&F<cr> . This setting configures your modem to
operate optimally with the software it is utilizing.
Note: Refer to your respective software manual for further information
on your communications software.
20