Multitech MULTIMODEM MT5600ZDX Owner's Manual page 52

MT5600ZDX Owner's Manual
Register Unit
S9
1/10 sec 0–255
S10 1/10 sec 1–255
S11
1 ms
S12 1/50 sec 50–255
S14
General Bit Mapped Options Status. Indicates the status of com-
mand options:
Bit 0 This bit is ignored
Bit 1 Command Echo (En)
Bit 2 Quiet Mode (Qn)
Bit 3 Result Codes (Vn)
Bit 4 Reserved
Bit 5 Tone (T) /Pulse(P)
Bit 4 Reserved
Bit 7 Originate/Answer
52
Range Default
6 (0.6)
14 (1.4) Sets the time, in tenths of a second,
50–255 95
50 (1sec)Defines the maximum period, in fif-
0 = Disabled (E0)
1 = Enabled (E1) Default
0 = Send Result Codes (Q0) Default
1 = Do not Send Result Codes (Q1)
0 = Numeric (V0)
1 = Verbose (V1) Default
0 = Tone (T) Default
1 = Pulse (P)
0 = Answer
1 = Originate (Default)
Description
Sets the time, in tenths of a second,
that the carrier must be present be-
fore the modem considers it valid
and turns on the RLSD.
that a carrier signal must be lost
before the modem disconnects.
Sets spacing and duration of dialing
tones.
tieths of second, allowed between
receipt of the last character of the
three escape character sequence
from the DTE (escape code guard
time).