Troubleshooting; None Of The Leds Light When The Modem Is On - Multitech MULTIMODEM MT5600ZDX Owner's Manual

MT5600ZDX Owner's Manual

Troubleshooting

Your MultiModemZDX was thoroughly tested at the factory before it
was shipped. If you are unable to make a successful connection or if
you experience data loss or garbled characters during your
connection, it is possible that the modem is defective. However, it is
more likely that the source of your problem lies elsewhere. Problems
you may encounter include:
•

None of the LEDs light when the modem is on;

• The modem does not respond to commands;
• The modem dials but is unable to make a connection;
• The modem disconnects while online;
• The modem cannot connect when answering;
• Slow file transfer;
• Losing data; or
• Garbage characters on the monitor.
None of the LEDs Light When the Modem Is On
When you turn on the MultiModemZDX, the LED indicators on the
front panel should flash briefly as the modem runs a self-test. If the
LEDs remain off, the modem is probably not receiving power.
• Make sure the modem's power switch is on, especially if you
normally turn on the modem by turning on a power strip.
• If the power supply is plugged into a power strip, make sure the
power strip is plugged in, and its power switch is on.
• Make sure the power supply module is firmly connected to the
modem and to the wall outlet or power strip.
• If the power strip is on and the modem switch is on, try moving the
modem power supply to another outlet on the power strip.
• Test the outlet is live by plugging a lamp into it.
• The modem or power supply may be defective. If you have
another Multi-Tech modem, try swapping modems. If the problem
goes away, the first modem or power supply may be defective.
Call Tech Support for assistance.
Note: Do not under any circumstances replace the power supply
module with one designed for another product, as it may damage
the modem and void your warranty.
22