Multitech MULTIMODEM MT5600ZDX Owner's Manual page 35

Command: S r = n
Values:
Default:
Description:
Command: S n
Values:
Default:
Description:
Command: V n
Values:
Default:
Description: V0
V1
Chapter 3 - AT Commands, S-Registers and Result Codes
Set Register Value
r = S-register number; n varies
None
Set value of register S r to value of n , where n is entered
in decimal format.
Read/Write Register Value
n, v, or ?
None
The modem selects an S-Register, performs an S-
Register read or write function, or reports the value of an
S-Register:
n Establishes S-Register n as the last
accessed.
n=v Sets the S-Register value.
n? Reports the value of S-Register n.
For example:
ATS7 establishes S7 as the last accessed register.
AT=40 sets the contents of the last register accessed to
40.
ATS=20 sets the contents of the last register accessed
to 20.
Terse/Verbose Result Code Format
n = 0 or 1
1
Displays Result Codes as digits (terse response).
Displays Result Codes as words (verbose response).
35