Garbage Characters On The Monitor - Multitech MULTIMODEM MT5600ZDX Owner's Manual
Hide thumbs
Also See for MULTIMODEM MT5600ZDX:
- User manual (83 pages) ,
- Quick start manual (58 pages) ,
- Owner's manual (84 pages)
Table of Contents
Advertisement
MT5600ZDX Owner's Manual
Garbage Characters on the Monitor
•
Your computer and the remote computer may be set to different
word lengths, stop bits, or parities. If you have connected at 8-N-
1, try changing to 7-E-1, or vice-versa, using your communications
software.
•
You may be experiencing line noise. Enable error correction, if it
is disabled, or hang up and call again; you may get a better
connection.
•
At speeds above 2400 bps, the remote modem might not use the
same transmission or error correction standards as your modem.
Try connecting at a slower speed or disabling error correction.
(With no error correction, however, line noise can cause garbage
characters.)
•
Try entering the &V (View Parameters) command, making a
screen print of the diagnostics listing, and checking for parameters
that may be unacceptable.
30
Advertisement
Table of Contents
Need help?
Do you have a question about the MULTIMODEM MT5600ZDX and is the answer not in the manual?