Multitech MULTIMODEM MT5600ZDX Owner's Manual page 55

Register Unit
S23 General Bit Mapped Options Status (Indicates the status of com-
mand Options.) Default: 62 (3Dh)
Bit 0 Grant RDL
Bit 1-3 DTE Rate
Bit 4-5 Assumed DTE parity
Bit 6-7 Guard Tone (&Gn)
S24 seconds 0–255
S25
seconds 0–255
Chapter 3 - AT Commands, S-Registers and Result Codes
Range Default
0 = RDL not allowed (&T5)--Default
1 = RDL allowed (&T4)
0 = 0-300 bps
1 = 0600 bps
2 = 1200 bps
3 = 2400 bps
4 = 4800 bps
5 = 9600 bps
6 = 19200 bps
7 = 38400 bps or higher (Default)
0 = even
1 = not used
2 = odd
3 = none (Default)
0 = none (&G0)--Default
1 = none (&G1)
2 = 1800 Hz (&G2)
0
5
Description
Sets the length of time, in seconds,
that the modem operates in normal
mode with no detected telephone or
DTE line activity before entering low-
power sleep mode. The timer is
reset upon any DTE or Telephone
line activity.
Sets the length of time, in seconds,
that the modem ignores DTR for
taking the action specified by &Dn.
Its units are one hundredths of a
second.
55