3: Connect Devices To The Projector - Christie CP2220 User Manual

3 Connect Devices to the Projector
This section provides information and procedures for connecting input devices to the projector. You connect
input devices to the Projector Intelligence Board (PIB) located on side of the projector.
These communication ports are accessible by removing the side source and communication access panel.
When connecting devices, route all cables along the channels located on the bottom of the projector and up
through the opening in the frame to the communication connection port.
Replace the access panel to ensure server and source connections remain secure.
CP2220 User Manual
020-100420-07 Rev.1 (1-2012)
From Cinema
Cinema Server
Connect to Ethernet hub
Figure 3-1 Connecting Cinema Sources
OR
Server
Connect to AC at site
3-1