3: Connect Devices To The Cinema Projector - Christie CP4230 Setup Manual

3 Connect Devices to the Cinema Projector
This section provides information and procedures for connecting input devices to the cinema projector. You
connect input devices to the cinema projector Intelligence Board (PIB) located on side of the cinema projector.
These communication ports are accessible by removing the side source and communication access panel.
When connecting devices, route all cables along the channels located on the bottom of the cinema projector
and up through the opening in the frame to the communication connection port.
Replace the access panel to ensure server and source connections remain secure.
CP4230 Setup Guide
020-100669-03 Rev. 1 (5-2014)
Figure 3-1 Connecting Cinema Sources
3-1