2.3 Before Operating Your Stove
Some minor installation and adjustment are required prior to use:
If desired, LCD sliding support can be installed on the left at the back of the stove; (see
Appendix B: Repositioning the LCD Sliding Bracket).
The handle and door must be adjusted; (see section 8.1.10 Door Adjustment)
The stove must be leveled using threaded legs;
The door overlay must be installed on the door frame as shown (see Appendix F:
Installing the Door Overlay).
Make sure the fresh air intake back draft shutter works freely.
Make sure to remove all tools or accessories that have been inserted in the stove for
transportation purposes (see following illustration.)
Euromax Pellet Stove Installation and Operation Manual
A LCD AND SUPPORT
B POWER CORD
C OWNER'S MANUAL
REMOVABLE
D
DRAWER HANDLE
E
THERMOSTAT
F SCRAPER
DESICCANT (drying
G
agent)
SWEEPING BRUSH
H
(the tie wrap must be
cut)
11