Selecting Manual Or Thermostat Mode - Enerzone Euromax EP00070 Installation And Operation Manual

6.1.8 Selecting Manual or Thermostat Mode

To change operating mode, press the desired mode from the Main Status Page.
34
Operating mode
(Thermostat or manual)
Press on the desired mode
Indicates that the stove is in manual mode. It will therefore run
continuously on the selected setting until it is manually modified,
turned OFF or if the stove runs out of pellets.
Indicates that the stove is in thermostat mode. The red waves
indicate that the thermostat is calling for heat. It will heat at the
selected combustion level until the thermostat has reached room
temperature setting.
The waves will disappear once the thermostat has reached room
temperature setting. At this time the combustion level will switch into
the selected pilot mode until its cycle is completed. When thermostat
calls for heat, the icon will change for the one with waves and
combustion level will use the last setting.
Euromax Pellet Stove Installation and Operation Manual