Cleaning The Dust Boots Of The Fork Legs - Husqvarna 701 Enduro 2017 Repair Manual

6 FORK, TRIPLE CLAMP
16
(EU)
Turn red adjusting screw O clockwise as far as it will go.
Info
Adjusting screw Q is located at the upper end of the right fork leg.
The rebound damping is located in right fork leg REB (red adjusting
screw). The compression damping is located in left fork leg COMP
(white adjusting screw).
I
Turn counterclockwise by the number of clicks corresponding to the fork
type.
Guideline
V00506-11
Rebound damping
Comfort
15 clicks
Standard
12 clicks
Sport
10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
(US)
Turn red adjusting screw Q clockwise as far as it will go.
Info
Adjusting screw O
is
located at the upper end of the right fork leg.
The rebound damping is located in right fork leg REB (red adjusting
screw). The compression damping is located in left fork leg COMP
(white adjusting screw).
I
P
Turn counterclockwise by the number of clicks corresponding to the fork
type.
Guideline
V00529-11
Rebound damping
Comfort 15 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
Cleaning the dust boots of the fork legs 6.3
Preparatory work
- Remove the fork protector. (SI p. 17)
Main work
- Push dust boots O °f both fork legs downward.
/
Info
The dust boots remove dust and coarse dirt particles from the inside fork
tubes. Over time, dirt can accumulate behind the dust boots. If this dirt is
not removed, the oil seals behind can start to leak.
I
/<
W
m
i
Q
9
Warning
Danger of accidents Oil or grease on the brake discs reduces the brak­
ing effect.
- Always keep the brake discs free of oil and grease.
- Clean the brake discs with brake cleaner when necessary.
A
E00069-10
M