12.4
Cleaning the dust boots of the fork legs
12.5
Removing the fork protector
SERVICE WORK ON THE CHASSIS 12
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the fork protector. (
Main work
–
Push dust boots
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
H00175-10
Warning
Danger of accidents Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
fork protector.
–
Remove screws
fork protector.
H03681-10
p. 54)
p. 55)
1
of both fork legs downward.
p. 154)
p. 56)
1
and take off the clamp.
2
on the left fork leg and take off the left
3
on the right fork leg and take off the right
p. 54)
55