Rj45 Lan Port: Gigabit Ethernet - VIA Technologies VB7009 User Manual

2.1.5. RJ45 LAN port: Gigabit Ethernet

The two integrated 8-pin Gigabit Ethernet ports are using an 8 Position 8 Contact (8P8C) receptacle
connector (commonly referred to as RJ45). The Gigabit Ethernet ports are controlled by VIA Gigabit
Ethernet controller. The pinout of the Gigabit Ethernet port is shown below.
Figure 10 Figure 10: Gigabit Ethernet port pinout diagram : Gigabit Ethernet port pinout diagram
Figure Figure 10 10 : Gigabit Ethernet port pinout diagram : Gigabit Ethernet port pinout diagram
Table Table 5 5 5 5 : Gigabit Ethernet port pinout : Gigabit Ethernet port pinout
Table Table : Gigabit Ethernet port pinout : Gigabit Ethernet port pinout
The RJ-45 port has two individual LED indicators located on the front side to show its Active/Link
status and Speed status.
Link Off
Speed_10Mbit
Speed_100Mbit
Speed_1000Mbit
Tab Table le le le 6 6 6 6 : Gigabit Ethernet LED color definition : Gigabit Ethernet LED color definition
Tab Tab : Gigabit Ethernet LED color definition : Gigabit Ethernet LED color definition
Pin Pin Pin Pin Signal Signal Signal Signal
1 Signal pair 1+
2 Signal pair 1-
3 Signal pair 2+
4 Signal pair 3+
5 Signal pair 3-
6 Signal pair 2-
7 Signal pair 4+
8 Signal pair 4-
Link LED Link LED
Link LED Link LED
(Left LED on RJ (Left LED on RJ- - - - 45 connector) 45 connector)
(Left LED on RJ (Left LED on RJ 45 connector) 45 connector)
Off
The LED is always On and flashing in
colors Green and Orange
The LED is always On in Green color
The LED is always On in Orange color
VB7009 VB7009 VB7009 VB7009 User Manual
Active LED Active LED Active LED Active LED
(Right LED on RJ- - - - 45 (Right LED on RJ 45
(Right LED on RJ (Right LED on RJ 45 45
connector) connector)
connector) connector)
Off
Flash in Yellow color
Flash in Yellow color
Flash in Yellow color
User Manual User Manual User Manual
14