Apm Settings - VIA Technologies VB7009 User Manual

6.30.6

APM Settings

APM enables the operating system to co-work with the BIOS to control the system power
management. The APM Configuration screen can be used to set a number of power management
functions.
Figure 78 Figure 78: Illustration of APM Configuration screen : Illustration of APM Configuration screen
Figure Figure 78 78 : Illustration of APM Configuration screen : Illustration of APM Configuration screen
6.30.6.1 6.30.6.1 Power Button Mode Power Button Mode
6.30.6.1 6.30.6.1 Power Button Mode Power Button Mode
The Power Button Mode has three options.
On/Off On/Off On/Off On/Off
When On/Off is selected, pressing the power button will instantly cause the system to power on or
off.
Standby Standby Standby Standby
When Standby is selected, the power button must be pressed and held down for 4 seconds before
the system will power off.
Suspend Suspend Suspend Suspend
When Suspend is selected, pressing the power button will instantly cause the system to enter
suspend mode.
6.30.6.2 6.30.6.2 6.30.6.2 6.30.6.2 Restore on AC/Power Loss Restore on AC/Power Loss Restore on AC/Power Loss Restore on AC/Power Loss
Restore on AC/Power Loss defines how the system will respond after AC power has been
interrupted while the system is on. There are three options.
Power Off Power Off Power Off Power Off
The Power Off option keeps the system in an off state until the power button is pressed again.
Power On Power On
Power On Power On
The Power On option restarts the system when the power has returned.
Last State Last State Last State Last State
The Last State option restores the system to its previous state when the power was interrupted.
VB7009 User Manual VB7009 VB7009 VB7009 User Manual User Manual User Manual
89