Power Management Setup; Eup/Erp Lot6; Acpi Suspend Type; Soft-Off By Pwrbtn - VIA Technologies VB7009 User Manual

6.20. Power Management Setup

Figure 62 Figure 62: Illustration of the Power Management Setup screen : Illustration of the Power Management Setup screen
Figure Figure 62 62 : Illustration of the Power Management Setup screen : Illustration of the Power Management Setup screen
The Power Management Setup section includes the following submenus:
Wakeup Event Detect
6.20.1.

EuP/ErP Lot6

This feature determines whether to let the system consume less power ACPI S3/S4/S5 state.
Settings: [Disabled, Enabled]
Note: Note:
Note: Note:
When EuP/ErP Lot6 support is enabled, the Wake on LAN from system OS ACPI S3/S4/S5 state will be disabled.
6.20.2.

ACPI Suspend Type

Settings Settings Settings Settings Description Description Description Description
S1(POS) S1/Power On Suspend (POS) is a low power state. In this state, no system context (CPU or chipset)
is lost and hardware maintains all system contexts.
S3(STR) S3/Suspend To RAM (STR) is a power-down state. In this state, power is supplied only to essential
components such as main memory and wakeup-capable devices. The system context is saved to
main memory, and context is restored from the memory when a "wakeup" event occurs.
S1 & S3 Depends on the OS to select S1 or S3.
6.20.3.

Soft-Off by PWRBTN

Settings Settings Description Description
Settings Settings Description Description
Delay 4 Sec System is turned off if power button is pressed for more than four seconds.
Instant-Off Power button functions as a normal power-on/-off button.
6.20.4.

Run VGABIOS if S3 Resume

Select whether to run VGA BIOS if resuming from S3 state. This is only necessary for older VGA
drivers.
Settings: [Auto, Yes, No]
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
EuP/ErP Lot6 [Disabled]
ACPI Suspend Type [S1&S3]
Soft-Off by PWRBTN [Instant-Off]
Run VGABIOS if S3 Resume [Auto]
AC Loss Auto Restart [Off]
HPET Support [Enabled]
WDRT Support [Enabled]
WDRT Run/Stop [Run]
WDRT Count [1023]
Wakeup Event Detect [Press Enter]
: Move Enter: Select +/-/PU/PD: Value
F5: Previous Values
Item Help
Menu Level
[Enable] or [Disable]
EuP/ErP Lot6 support
used GPIO0, for MB
VT8595C and later.
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
VB7009 User Manual VB7009 VB7009 VB7009 User Manual User Manual User Manual
70