Set Supervisor/User Password - VIA Technologies VB7009 User Manual

Mini-itx embedded board
Hide thumbs Also See for VB7009:
Table of Contents

Advertisement

6.26 Set Supervisor/User Password

Figure 68
Figure
Figure
Figure
68 68
68: Illustration of the Set Supervisor/User Password screen
: Illustration of the Set Supervisor/User Password screen
: Illustration of the Set Supervisor/User Password screen
: Illustration of the Set Supervisor/User Password screen
This option is for setting a password for entering BIOS Setup. When a password has been set, a
password prompt will be displayed whenever BIOS Setup is run. This prevents an unauthorized
person from changing any part of your system configuration.
There are two types of passwords you can set: Supervisor password and User password. When a
supervisor password is used, the BIOS Setup program can be accessed and the BIOS settings can be
changed. When a user password is used, the BIOS Setup program can be accessed but the BIOS
settings cannot be changed.
To set the password, type the password (up to eight characters in length) and press <Enter>
password typed now will clear any previously set password from CMOS memory. The new
password will need to be reentered to be confirmed. To cancel the process press <Esc>
To disable the password, press <Enter>
show up to confirm disabling the password. To cancel the process press <Esc>
Additionally, when a password is enabled, the BIOS can be set to request the password each time
the system is booted. This would prevent unauthorized use of the system. See "Security Option" in
the "Advanced BIOS Features" section for more details.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Enter Password:
Power Management Setup
PnP/PCI Configurations
PC Health Status
Esc: Quit
F10: Save & Exit Setup
Change/Set/Disable Password
<Enter> when prompted to enter a new password. A message will
<Enter>
<Enter>
Frequency/Voltage Control
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
VB7009
VB7009 User Manual
VB7009
VB7009
User Manual
User Manual
User Manual
<Enter>. The
<Enter>
<Enter>
<Esc>.
<Esc>
<Esc>
<Esc>.
<Esc>
<Esc>
78

Advertisement

Table of Contents
loading

Table of Contents