Table of Contents
Advertisement
Troubles for which error messages are given on the LCD
If something is wrong with the machine, the buzzer sounds and a corresponding error message is given on
the LCD. Take an appropriate corrective measure in accordance with the message.
Warning Message
Message
< L OC A L >
NO C A R T R I DGE
< L OC A L >
I N K N E A R E ND
< L OC A L >
I N K E ND
< L OC A L >
E x p i r a t i o n
< L OC A L >
I N K T Y P E
< L OC A L >
C o l o r
o f
I N K
< L OC A L >
NON - OR I G I N A L
< L OC A L >
WRONG I N K
I C
< L OC A L >
! WOR K H i g h
< L OC A L >
WA T E R L A C K
< L OC A L >
! WS I N K T A N K CH K
< L OC A L >
W I P E R BO T T L E
< L OC A L >
! R E P L A C E W I P E R
< L OC A L >
! CH E C K F I L T E R
< L OC A L >
C A P C L E A N I NG
< L OC A L >
C a s e We i g h t
< L OC A L >
I N K L V L L OW
5-4
• Attach the ink cartridge(s) shown on the display. (
• Replace the ink cartridge shown on the display as soon as possible.
(
P.4-4)
• Replace the ink cartridge shown on the display. (
• The ink has expired. Replace the ink cartridge shown on the display with
a new one. (
P.4-4)
• Check the type of the loaded ink cartridge is correct.
• Check the color shown on the display and the color of the loaded ink car-
tridge are the same.
• Use the MIMAKI ink.
• Insert the ink cartridge shown on the display again. If the error is still dis-
played after this, call a distributor in your district or our office.
• An obstacle was detected. Lower the table so that this warning disap-
pears. (
P.3-4)
• Check the amount of water in the cooling water tank, and fill as needed.
(
P.4-34)
• Execute the station maintenance and dispose of the ink in the waste ink
tank. (
P.4-14)
• Execute the station maintenance and dispose of the ink in the wiper bot-
tle. (
P.4-16)
• Execute the station maintenance and clean the wiper. (
• Execute the station maintenance and replace the filter. (
• Execute the carriage out of the station maintenance, and clean the cap.
• A case weight of 600 ml cartridge is not set. Set the case weight on "600
ml CARTRIDGE" of "MACHINE SET".
• Enter weight of the cartridge on "CART WEIGHT" of "SET UP".
Solution
P.4-4)
P.4-4)
P.4-32)
P.4-18)
Advertisement
Table of Contents
