Table of Contents
Advertisement
Troubles for which error messages are given on the LCD
If something is wrong with the machine, the buzzer sounds and a corresponding error message is given on
the LCD. Take an appropriate corrective measure in accordance with the message.
Warning Message
Message
< L OC A L >
NO C A R T R I DGE
< L OC A L >
I N K N E A R E ND
< L OC A L >
I N K E ND
< L OC A L >
E x p i r a t i o n
< L OC A L >
E x p i r a t i o n
< L OC A L >
E x p i r a t i o n ( 1 M )
< L OC A L >
E x p i r a t i o n ( 2 M )
< L OC A L >
I N K T Y P E
< L OC A L >
C o l o r
o f
I N K
< L OC A L >
NON - OR I G I N A L
< L OC A L >
WRONG I N K
I C
< L OC A L >
! WOR K H i g h
< L OC A L >
WA T E R L A C K
< L OC A L >
! WS I N K T A N K CH K
< L OC A L >
W I P E R BO T T L E
< L OC A L >
! C L E A N I NG W I P E R
< L OC A L >
! CH E C K F I L T E R
5-4
• Attach the ink cartridge(s) shown on the display. (
• Replace the ink cartridge shown on the display as soon as possible.
(
P.4-4)
• Replace the ink cartridge shown on the display. (
• The ink has expired. Replace the ink cartridge shown on the display with
a new one. (
P.4-4)
• The ink has expired. Replace the ink cartridge shown on the display with
a new one. (
P.4-4)
expiration)
• The ink has expired. Replace the ink cartridge shown on the display with
a new one. (
P.4-4)
month following the expiration)
• The ink has expired. Replace the ink cartridge shown on the display with
a new one. (
P.4-4)
• Check the type of the loaded ink cartridge is correct.
• Check the color shown on the display and the color of the loaded ink car-
tridge are the same.
• Use the MIMAKI ink.
• Insert the ink cartridge shown on the display again. If the error is still dis-
played after this, call a distributor in your district or our office.
• An obstacle was detected. Lower the table so that this warning disap-
pears. (
P.3-4)
• Check the amount of water in the cooling water tank, and fill as needed.
(
P.4-34)
• Execute the station maintenance and dispose of the ink in the waste ink
tank. (
P.4-14)
• Execute the station maintenance and dispose of the ink in the wiper bot-
tle. (
P.4-16)
• Execute the station maintenance and clean the wiper. (
• Execute the station maintenance and replace the filter. (
Solution
(Before the end of the month of the expiration)
(From the first day to the end of the month following the
(From the first day to the end of the month following the
(3 months or more after expiration)
P.4-4)
P.4-4)
P.4-32)
P.4-18)
Advertisement
Table of Contents
