Troubles For Which Error Messages Are Given On The Lcd; Errors Accompanied By Warnings - MIMAKI JF-1631 Operation Manual

Troubles for which error messages are given on the LCD

If something is wrong with the device, the buzzer sounds and a corresponding error message is given on
the LCD. Take an appropriate corrective measure in accordance with the message.

Errors accompanied by warnings

Warning message
< L O C A L >
N O C A R T R D G : MC Y K K Y CM
< L O C A L >
I N K N E A R E N D : MC Y K K Y CM
< L O C A L >
I N K E N D : MC Y K K Y CM
< L O C A L >
C A R T R I G E : MC Y K K Y CM
< L O C A L >
E x p i r a t i o n : MC Y K K Y CM
< L O C A L >
I N K T Y P E : MC Y K K Y CM
< L O C A L >
C o l o r o f I N K : MC Y K K Y CM
< L O C A L >
N O N - O R I G N L : MC Y K K Y CM
< L O C A L >
WR N G I N K I C : MC Y K K Y CM
5-4
Cause
The ink cartridge is not attached
to the ink station.
The amount of ink remaining in
the ink cartridge is insufficient.
The ink cartridge has run out of
ink.
An error on an inserted ink
cartridge
The ink will expire soon or has
expired.
The type of the loaded ink
cartridge is different from the
previous one.
The color of the loaded ink
cartridge is different from the
previous one.
The loaded ink cartridge is not
MIMAKI genuine.
The IC chip of the ink cartridge
cannot be read normally.
Corrective measure
• Attach the ink cartridge(s) correspond-
ing with the color shown on the dis-
play.
( P.2-4)
• Replace an ink cartridge of the
displayed head with new one ahead of
time.
( P.4-4)
• Replace the ink cartridge of which
color is shown on the LCD with a new
one.
( P.4-4)
• Remove an ink cartridge of the
displayed head and insert it again. If
the error is still displayed after this
operation, call the dealer or our
branch for the service.
• Replace the ink cartridge of which
color is shown on the LCD with a new
one.
( P.4-4)
• Check the type of the loaded ink
cartridge.
• Check the color of the loaded ink
cartridge.
• Use the ink specified by MIMAKI.
• Remove an ink cartridge of the
displayed head and insert it again. If
the error is still displayed after this
operation, call the dealer or our
branch for the service.