Table of Contents
Advertisement
Troubles for which error messages are given on the LCD
If something is wrong with the device, the buzzer sounds and a corresponding error message is given
on the LCD.
Take an appropriate corrective measure in accordance with the message.
Errors accompanied by warnings
These errors arise on the ink-related components.
Warning message
< LOCAL >
CARTRIDGE
KKCCMMYY
< LOCAL >
NEAR END
KKCCMMYY
< LOCAL >
INK END
KKCCMMYY
< LOCAL >
REPLACE WIPER
Cause
The mounted ink cartridge is
defective.
The amount of ink remaining in
the ink cartridge is insufficient.
The ink cartridge has run out of
ink.
Time to replace the wiper in the
capping station with a new one
has come.
- 6.6 -
Corrective measure
Press the [ENTER] key to display
the details of the error. Check the
error.
Printing can be continued in file-
by-file basis by pushing the
[REMOTE] key. However, it is
recommended to replace the ink
cartridge of which number is
shown on the LCD with a new
one.
Replace the ink cartridge of
which color is shown on the LCD
with a new one.
Printing will be enabled by
pushing the [REMOTE] key.
Then, the error message will not
appear until the power is returned
on. It is recommended, however,
to replace the wiper with a new
one as soon as possible.
Advertisement
Table of Contents
