Scan Defaults - Dell H625cdw User Manual

Transmission Redial Attempts
Defaults
Interval of Redial
Resend Delay
Tone/Pulse
Prefix Dial
Prefix Dial
Number
Fax Cover Page
Fax Header
ECM
Modem Speed
Display Manual
Fax Recipients
Fax Reports Fax Activity
Fax Transmit
Fax Broadcast
Fax Protocol

Scan Defaults

Creates your own default scan settings.
154
| Dell™ Printer Configuration Web Tool
Sets the number of redial attempts to make if
the destination fax number is busy. If you enter
0, the printer does not redial.
Sets the interval between redial attempts.
Sets the interval between re-send attempts.
Sets whether to use tone or pulse dialing.
Sets whether to set a prefix dial number.
Sets a prefix dial number of up to five digits. This
number dials before any auto dial number is
started. It is useful for accessing the Private
Automatic Branch Exchange (PABX).
Sets whether to attach a cover page to faxes.
Sets whether to print the information of the
sender on the header of faxes.
Sets whether to enable the Error Correction
Mode (ECM). To use the ECM, the remote
machines must also support the ECM.
Allows you to adjust the fax modem speed
when a fax transmission or reception error
occurs.
Sets whether to show the fax number of the
recipient on the Sending Fax screen when
manually sending a fax.
Sets whether to automatically print a fax activity
report after every 50 incoming and outgoing fax
communications.
Sets whether to print a transmission report after
every fax transmission or only when an error
occurs.
Sets whether to print a transmission report after
every fax transmission to multiple destinations
or only when an error occurs.
Sets whether to print the protocol monitor
report after every fax transmission or only when
an error occurs.