Dell H625cdw User Manual page 389

Cloud mfp laser printer
Hide thumbs Also See for H625cdw:
Table of Contents

Advertisement

Problem
Document misfeeds or multiple
feeds occur in the DADF.
Vertical blanks or streaks appear on
the output when scanned using the
DADF.
A smear appears at the same
location on the output when
scanned using the document glass.
Images are skewed.
Diagonal lines appear jagged when
scanned using the DADF.
Message appears on your computer
screen:
• "Device can't be set to the H/W
mode you want."
• "Port is being used by another
program."
• "Port is Disabled."
• "Scanner is busy receiving or
printing data. When the current
job is completed, try again."
• "Invalid handle."
• "Scanning has failed."
The printer does not properly
transfer scan data to a specified
destination via the Scan to Email or
Scan to Network Folder feature.
Action
Make sure that the DADF roller assembly is installed properly.
Make sure that the document's paper type meets the specifications
for the printer. See "Supported Print Media."
Make sure that the document is properly loaded in the DADF.
Make sure that the document guides are adjusted properly.
Make sure that the number of document sheets does not exceed
the maximum capacity of the DADF.
Make sure that the document is not curled.
Fan the document well before loading it in the DADF.
Clean the DADF glass. See "Cleaning the Scanner."
Clean the document glass. See "Cleaning the Scanner."
Make sure that the document is loaded straight in the DADF or on
the document glass.
Before loading the document(s) on the DADF, straighten the edges
of the stack of the document(s).
For documents of thick paper, use the document glass.
There may be a copy or print job in progress. When the current job
is complete, try the job again.
The selected port is currently being used. Restart your computer
and try again.
The cable may be improperly connected or the printer may be
turned off.
The scanner driver is not installed or an operating environment is
not set up properly.
Make sure that the port is properly connected and the printer is
turned on. Then restart your computer.
Make sure that the USB or Ethernet cable is connected properly.
Make sure that the following settings have been set correctly on
Dell Printer Configuration Web Tool.
Scan to Network Folder:
Check the following settings under Address Book
Address.
• Server Address
• Share Name
• Server Path
• Login Name
• Login Password
Scan to Email:
Check the following setting under Address Book
• Address
Server
E-Mail Address.
Troubleshooting
|
389

Advertisement

Table of Contents
loading

Table of Contents