Network Settings; Usb Settings; Pcl Settings - Dell H625cdw User Manual

Output Settings
*1
This is available on certain regions.
*2
This setting does not affect fax job.

Network Settings

Specifies the PostScript 3 Compatible communication protocol for the printer.
Network Settings

USB Settings

Specifies USB settings of the printer.
USB Settings

PCL Settings

Specifies the Printer Control Language (PCL) settings.
Default Paper Size
Print ID
Print Text
Banner Sheet Insert
Position
Banner Sheet Specify
Tray
Substitute Tray
Letterhead 2 Sided
A4<>Letter Switch
A5<>Statement
Switch
Report 2 Sided Print
Use Another Tray
Resume Printing After
*2
Jam Recovery
Tap To Print
PS Data Format
USB Port
PS Data Format
Job Time-out
Sets the default print paper size.
Sets where to print the user ID on the output paper.
Sets whether the printer outputs Page Description
Language (PDL) data which is not supported by the
printer as text when the printer receives it.
Sets where to insert a banner sheet in the output.
Sets from which tray a banner sheet is fed.
Sets whether to use another size paper when the paper
that is loaded in the specified tray does not match the
paper size settings for the current job.
Sets whether to print on both sides of letterhead.
Sets whether to print A4 size jobs on Letter size paper if
A4 is not available in the paper trays and vice versa.
Sets whether to print A5 size jobs on Statement size paper
if A5 is not available in the paper trays and vice versa.
Sets whether to print reports on both sides a sheet of
paper.
Sets whether to show a message to select another tray
when the specified paper is not available in the paper tray.
Sets whether to delete print job after recovering from
paper jam.
Sets whether to add the printer to a mobile device such as
a tablet or a smartphone by tapping the device to the
(NFC) reader.
Sets PostScript 3 Compatible communication protocol
for each interface.
Sets whether to enable the USB interface on the printer.
Sets PostScript 3 Compatible communication protocol
for each interface.
Sets the amount of time the printer waits for data to arrive
from the computer.
Dell™ Printer Configuration Web Tool
145
|