Table of Contents
Advertisement
curled, try to lower the temperature. When the toner does not fuse on the paper
properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Adjust Fusing Unit
Color Registration Adjustments
Specifies whether to automatically perform color registration adjustment.
Clean Developer
Stirs the developer in the drum cartridge and cleans the transfer unit.
Clean Developer
Reset Defaults
Initializes the non-volatile (NV) memory. After executing this setting and restarting the
printer, all the menu parameters are reset to their default values.
Plain
2
(60-90g/m
)
Plain Thick
2
(91-105g/m
)
Covers
2
(106-176g/m
)
Covers Thick
2
(177-220g/m
)
Coated
2
(106-176g/m
)
Coated Thick
2
(177-220g/m
)
Label
Envelope
Recycled
Clean Developer and
Transfer Unit
Yellow Toner Refresh Click Start to expel the toner in the drum cartridge, and
Magenta Toner
Refresh
Cyan Toner Refresh
Black Toner Refresh
Sets the temperature settings for the fusing unit for each
paper type.
Click Start to stir the developer in the drum cartridge and
clean the transfer unit.
supply the fresh toner from the toner cartridge.
Dell™ Printer Configuration Web Tool
157
|
Advertisement
Table of Contents
