Dell H625cdw User Manual page 314

Status-Code
016-505
016-506
016-507
016-520
016-521
016-530
016-541
016-542
016-543
016-718
016-720
016-756
016-757
016-758
016-759
016-764
016-765
314
| Understanding Printer Messages
What you can do
E-mail POP3 server login error. Tap Close, or wait for 60 seconds for the
printer to recover. Make sure that user name and password used for POP3
server are set correctly.
SMTP server is not configured. Tap Close, or wait for 60 seconds for the
printer to recover. Make sure that SMTP server or POP server is set.
E-mail SMTP server login error. Tap Close, or wait for 60 seconds for the
printer to recover. Make sure that user name and password used for SMTP
server are set correctly.
The certificate of the printer is invalid. Contact your system administrator.
Reset the certificate from other connectable clients with Dell Printer
Configuration Web Tool. If no device can be connected, disconnect
Ethernet cable, turn off the IPsec, and then reset the certificate with Dell
Printer Configuration Web Tool.
The certificate of the destination client is invalid. Contact your system
administrator. Check the certificate of the destination client and reset.
Authentication server access error. Turn off the printer, and then turn it on
again. Check the access settings for the authentication server and try
again. Contact customer support if this failure is repeated.
A wireless certificate of the server or client cannot be correctly referenced
while using Wireless LAN WPA-Enterprise or WPA2-Enterprise. Ask your
system administrator to connect the printer with a wired network, initialize
the wireless settings, import the wireless certificate, and then set
WPA-Enterprise or WPA2-Enterprise again.
A server certificate error has occurred when acquiring the certificate with
the operation of WPA-Enterprise or WPA2-Enterprise. This is a problem in
the server certificate, such as the validity period has expired for the server
certificate being used with the Radius server. Ask your system
administrator to check the server certificate being used with the Radius
server.
A wireless certificate of the server or client corruption error has occurred
while using the Wireless LAN WPA-Enterprise or WPA2-Enterprise. Ask
your system administrator to connect the printer with a wired network,
initialize the wireless settings, import the wireless certificate, and then set
WPA-Enterprise or WPA2-Enterprise again.
Error relating to USB Direct Print problems has occurred. While the USB
flash drive is still inserted, set Image Types to Photos (Standard
Quality) in Print Settings under the Print PDF/TIFF menu and
try printing again. See "Image Types."
Error relating to Page Description Language (PDL) emulation problems
has occurred. Change the Print Mode setting in the Graphics tab of the
print driver. Contact customer support if this failure is repeated.
Printing in the prohibited time. Contact your system administrator.
The account is not registered. Contact your system administrator.
The function cannot be used. Contact your system administrator.
Printable page limit is exceeded. Contact your system administrator.
An error occurs when the printer connected to the SMTP server. Tap
Close, or wait for 60 seconds for the printer to recover. Check the SMTP
server settings or contact the SMTP server administrator.
The capacity of the SMTP server is not enough. Tap Close, or wait for 60
seconds for the printer to recover. Contact the SMTP server administrator.