Table of Contents
Advertisement
❚
Admin Settings > Network >
Protocols
Enables or disables each protocol. The change becomes effective after the printer is
turned off and then on again.
LPD
Port9100
FTP
IPP
SMB TCP/IP
*1
WSD Print
WSD Scan
Network TWAIN
*2
SNMP UDP
E-mail Alert
Dell Printer Configuration Web Tool
Bonjour(mDNS)
Telnet
Update Address Book
HTTP-SSL/TLS
Google Cloud Print
Print from Widget Apps
Scan to Widget Apps
*1
Stands for Web Services on Devices
*2
Stands for Simple Network Management Protocol
❚
Admin Settings > Network >
Advanced Settings
Specifies advanced network settings.
❚
Admin Settings > Network > Advanced Settings >
IP Filter
Specifies whether to enable the IP filter feature, which only allows communication with
devices whose IP addresses are registered in the printer.
NOTE:
• This feature does not apply to communication via Wi-Fi Direct.
IPv4 - Filter
IPv6 - Filter
❚
Admin Settings > Network > Advanced Settings >
IEEE 802.1x
NOTE:
• IEEE 802.1x is displayed only when the printer is connected using Ethernet cable and it is available
only when the IEEE 802.1x authentication is enabled.
Disables IEEE 802.1x authentication. The change becomes effective after the printer is
turned off and then on again.
96
|
Understanding the System Menus
Enables or disables IPv4 - Filter.
Enables or disables IPv6 - Filter.
Advertisement
Table of Contents
