Table of Contents
Advertisement
*
This item is available only when the printer is connected using an Ethernet cable.
NOTE:
• The settings in the Port Settings page become valid only when the printer is restarted. When you
change or configure the settings, click the Apply New Settings button to apply the new settings.
TCP/IP
Configures the IP address, subnet mask, and gateway address of the printer.
TCP/IP Settings
IP Mode
Host Name
IPv4
IPv6
IP Address Mode Sets the method for acquiring the IP address.
Manual IP
When an IP address is being set manually, the IP
Address
is allocated to the printer using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to
254 cannot be specified for the first octet of a
gateway address.
Manual Subnet
When an IP address is being set manually, the
Mask
subnet mask is specified using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to
255. 255.255.255.255 cannot be specified as the
subnet mask.
Manual Gateway
When an IP address is being set manually, the
Address
gateway address is specified using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to
254 cannot be specified for the first octet of a
gateway address.
Enable Stateless
Select the check box to enable the stateless
Address
address.
Use Manual
Select the check box to set the IP address
Address
manually.
Get IP Address
Allows you to enable or disable the automatic
from DHCP
setting of the IP address via DHCP.
Manual Address
Sets the IP address. To specify an IPv6 address,
enter the address followed by a slash (/) and
then "64." For details, contact your system
administrator.
Manual Gateway
Sets the gateway address.
Address
Dell™ Printer Configuration Web Tool
161
|
Advertisement
Table of Contents
