Tray Priority - Dell H625cdw User Manual

❚
Tray Management > Tray Settings >
MPF
Specifies the paper loaded in the Multipurpose Feeder (MPF).
Display Tray Prompt
MPF Mode
Size
Type
❚
Tray Management > Tray Settings >
Tray1
Specifies the paper loaded in tray1.
Display Tray Prompt
Size
Type
NOTE:
• For details about supported paper sizes, see "Supported Print Media."
❚
Tray Management > Tray Settings >
Tray2
NOTE:
• The Tray2 setting is available only when the optional 550-sheet feeder is installed.
Specifies the paper loaded in the optional 550-sheet feeder.
Display Tray Prompt
Size
Type
❚
Tray Management >

Tray Priority

Sets the priority order of the paper trays for automatic tray selection. If paper trays
loaded with the same paper size and type exists, the paper tray is selected according to
this priority order.
116
| Understanding the System Menus
Use Panel Settings
Use Printer Driver
Settings
Manual
Select the checkbox to display a popup message that prompts to set
the paper type and paper size when paper is loaded in tray1. The
factory default is on (selected).
Specifies the paper size.
Specifies the paper type.
Select the checkbox to display a popup message that prompts to set
the paper type and paper size when paper is loaded in the optional
550-sheet feeder. The factory default is on (selected).
Sets whether to specify the paper size automatically or manually.
Specifies the paper type.
Select the checkbox to display a popup message that
prompts to set paper type and paper size when paper is
loaded in the MPF. The factory default is on (selected).
Uses the paper size and type specified on the operator
panel.
Uses the paper size and type specified on the print driver.
When the print job is started, the printer pauses the job
and shows the screen to prompt the user to load the
paper of the specified size and type. To continue the job,
check that the specified paper is loaded, and then tap
Continue in the screen on the touch panel.
Specifies the paper size.
Specifies the paper type.