Dell H625cdw User Manual page 158

Reset Defaults
*
This is available on Dell H625cdw and Dell H825cdw.
Initialize Print Meter
Initializes the print meter of the printer. When the print meter is initialized, the meter
count is reset to 0.
Clear Stored Jobs
NOTE:
• Clear Stored Jobs feature is available only when RAM Disk is enabled.
Clears all files stored in the RAM disk.
Clear Stored Jobs
Non-Dell Toner
Uses toner cartridge of another manufacturer.
CAUTION:
• Using a non-Dell toner cartridge may severely damage the printer. The warranty does not cover
damages caused by using non-Dell toner cartridges.
Adjust Altitude
Specifies the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric
pressure. Adjustments are performed by specifying the altitude of the location where the
printer is being used.
Clock Settings
Specifies the clock settings.
158
| Dell™ Printer Configuration Web Tool
Reset Defaults User
Fax Section and
restart printer.
Reset Defaults User
Scan Section and
restart printer.
Reset Defaults User
Account Section and
*
restart printer.
Reset Defaults User
App Section and
*
restart printer.
Reset Defaults System
Section and restart
printer.
Power On Wizard
All
Secure Document
Stored Document
Click Start to reset the fax number entries in the address
book.
Click Start to reset the e-mail and server address entries
in the address book.
Click Start to reset the user account entries.
Click Start to reset the user application entries.
Click Start to reset the system parameters.
Click Start to perform the initial setup for the printer.
Click Start to clear all files stored as Secure Print, Proof
Print, Private Mailbox, and Public Mailbox in the RAM disk.
Click Start to clear all files stored as Secure Print in the
RAM disk.
Click Start to clear all files stored as stored print in the
RAM disk.