Table of Contents
Advertisement
General
Timers
144
|
Dell™ Printer Configuration Web Tool
Power Saver Time -
Sleep
Power Saver Time -
Deep Sleep
Power Saver Time -
*1
Power Off Timer
mm / inch
Screen Brightness
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Copy Completed
Tone
Job Completed Tone Sets the volume of the tone that is emitted when a job
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Alert Tone Sets the volume of the tone that is emitted when the
Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds
NFC Authentication
*1
Tone
All Tones
Low Toner Alert
Message
OffHook Wake Up
Auto Log Print
RAM Disk
Panel Language
Max E-mail Size
Auto Reset
Fault Time-out
Sets the time taken by the printer to enter Sleep mode
after it finishes a job.
Sets the time taken by the printer to enter Deep Sleep
mode after it has entered Sleep mode.
Sets the time taken by the printer to enter Power Off
mode after it has entered Deep Sleep mode.
Sets the measurement unit to be used on the touch panel
as either mm or inches.
Sets the brightness level of the touch panel.
Sets the volume of the tone that is emitted when the
operator panel input is correct, or disables the tone.
Sets the volume of the tone that is emitted when the
operator panel input is incorrect, or disables the tone.
Sets the volume of the tone that is emitted when the
printer becomes ready, or disables the tone.
Sets the volume of the tone that is emitted when a copy
job is complete, or disables the tone.
other than a copy job is complete, or disables the tone.
Sets the volume of the tone that is emitted when a job
ends abnormally, or disables the tone.
Sets the volume of the tone that is emitted when a
problem occurs, or disables the tone.
Sets the volume of the tone that is emitted when the
printer runs out of paper, or disables the tone.
toner is low, or disables the tone.
before the printer performs auto clear, or disables the
tone.
Sets the volume of the tone that is emitted when an NFC
card is placed on the NFC reader for authentication, or
disables the tone.
Sets the volume of all the alert tones, or disables all the
tones.
Alerts you if the toner is low.
Sets whether to wake up from Sleep or Deep Sleep mode
when you pick up the handset of the external telephone.
Sets if a job history needs to be printed after every 20
jobs.
Sets whether to allocate RAM for the file system for the
Secure Print, Proof Print, Private Mailbox, and Public
Mailbox features.
Used to set the language on the touch panel.
Sets the maximum size of e-mail that can be sent.
Sets the amount of time before the printer automatically
resets its settings to the defaults when no additional
settings are made.
Sets the amount of time the printer waits before
canceling a job that stops abnormally.
Advertisement
Table of Contents
