Paper Select Mode; Print Mode - Dell H625cdw User Manual

❚
Admin Settings > PS >

Paper Select Mode

Specifies the way to select the tray for PostScript 3 Compatible mode. The change
becomes effective after the printer is turned off and then on again.
Auto
Select From Tray
❚
Admin Settings > PS >
Default Color
Specifies the color mode to Color or Black. This setting is used for a print job which
does not specify a Print Mode.
❚
Admin Settings >
PDF
Use the PDF menu to change printer settings that only affect the PDF jobs.
❚
Admin Settings > PDF >
Quantity
Specifies the number of copies to print.
❚
Admin Settings > PDF >
2 Sided Print
Specifies whether to print on one side or both sides of a sheet of print media. For a
two-sided printing, you can specify the printout to be bound by the long edge or short
edge.
❚
Admin Settings > PDF >

Print Mode

Specifies the Print Mode.
Normal
High Quality
High Speed
❚
Admin Settings > PDF >
PDF Password
Specifies the password to print a PDF file secured with a password to open the PDF file.
❚
Admin Settings > PDF >
Collation
Specifies whether to sort the PDF job.
The tray is selected as the same setting as in the PCL mode.
The tray is selected in a method compatible with regular PostScript 3
Compatible printers.
For documents with normal sized characters.
For documents with small characters or thin lines, or documents
printed using a dot-matrix printer.
Prints with the higher speed than the Normal mode, but the quality is
less.
Understanding the System Menus
89
|