Turning Off The Printer; Setting Initial Settings On The Operator Panel - Dell H625cdw User Manual

Turning Off the Printer

NOTE:
• The data in the memory is cleared when the printer is turned off.
Press and hold the
the touch panel, and then tap Power Off.
CAUTION:
• Pressing and holding the button for six or more seconds can turn off the printer immediately.
However, note that this may result in the loss of data in memory.

Setting Initial Settings on the Operator Panel

You need to set the printer language, country, clock date, time, and fax settings when
the printer is turned on for the first time.
When you turn the printer on, the wizard screen to perform the initial setup appears on
the touch panel. Perform the following procedure to set the initial settings.
NOTE:
• If you do not start configuring the initial settings, the printer restarts in 3 minutes, and the Home
screen appears on the touch panel. After that, you can set the following initial setup by enabling
the Power On Wizard on the touch panel from:
The (Information) button
General Power On Wizard.
You can also set the same setting using Dell Printer Configuration Web Tool.
See "Dell™ Printer Configuration Web Tool."
1 Turn on the printer.
2 Tap
until desired language appears, and then tap the desired language.
3 Tap Next Time Zone.
4 Tap
until the desired geographic region appears, and then tap the desired
geographic region.
5 Tap until the desired time zone appears, and then tap the desired time zone.
32
| Turning On/Off the Printer
(Power) button until the Power Management screen appears on
Tools tab Admin Settings System Settings