Starting The Engine (Electric Start) - KYMCO PEOPLE 50 Owner's Manual

OPERATION
Reflectors: Look to make sure all of the safety reflectors are
still mounted to your scooter. Replace any missing or dam-
aged reflectors.
Lubrication points: Occasionally check and lubricate cer-
tain controls and points on the scooter as indicated in the
periodic maintenance schedule (see pages 40 - 41).
30

Starting the engine (electric start)

To start your scooter using the electric starter motor, follow
this procedure:
NOTE: Before starting, check the engine oil and fuel lev-
els. Take the scooter off of the main or side stand.
1 1 1 1 1
1. Unlock the steering with the ignition switch key and turn the
ignition switch 1 to the "ON" position.
2. Apply the rear brake (left lever) .