Upgrading Pagescope Net Care - Konica Minolta magicolor 2350 Reference Manual

4
Click the Stop button.
5
Click Yes on the confirmation dialog box.
Windows Me & 98
1
Right click the PageScope Net Care icon in the task tray.
2
Select Exit.
3
Click the Shut Down button on the confirmation window.
Solaris/Linux
Use root privileges to perform these operations.
Shut down the PageScope server by typing.
Solaris
#/etc/init.d/nmu stop
Linux
#/etc/rc.d/init.d/nmu stop

Upgrading PageScope Net Care

If a printer on the server is upgraded, delete it from List Manager
and then let List Manager find and register it again or add it to the list
again using Add Printer. This updates the information about the
printer.
Upgrade Notes
You can upgrade from PageScope 3.6 or later, but not from earlier versions.
Upgrades work best if performed at the same time as the installation.
Upgrading after installation causes all PageScope Net Care 4.0 data to be
replaced by old PageScope data.
Shut down the PageScope Net Care server before upgrading it.
All Platforms
1
If you are running an old version of PageScope, shut down the server.
Specify a different directory for PageScope Net Care than the one where
the old version of PageScope is installed.
2
If PageScope Net Care is running, shut it down.
Upgrading PageScope Net Care
Chapter 3.5—157