Printer Interface Setup - Konica Minolta magicolor 2350 Reference Manual

22
Choose Create.
23
From the Assignments
tab, select Add.
24
Select the printer you
named in previous
steps. Change the
context if needed.
25
Select OK twice.
Additional
properties,
such as users
and operators,
can also be assigned during initial installation or at a later time.
The NetWare setup is now complete. If you haven't already done so,
configure the printer interface (see the next section).

Printer Interface Setup

The following instructions describe how to configure your printer's interface
for NDS PServer mode through the printer control panel, through PageScope
Light, and through PageScope Net Care.
Configuring the Print Server Context Using the Printer
Control Panel
From the Interface/Ethernet/IPX/SPX menu on the printer's control panel,
enter values for the following parameters.
Frame Type
Printer Interface Setup
Allows you to specify the frame type used by the
NetWare interface
Chapter 2.9—105